Tech Talk - Dynacord MV 15 (1957)

Difficult to find much more info on this 15 Watts

Tech Talk - Dynacord Twen II (1974)

2x6V6 power tubes 17 Watts
12" speaker

Tech Talk - Dynacord MV15 (1960)

Valves / Tubes 6: ECC83 ECC83 EF86 EZ81 EL84 EL84
Principle Audio-Amplification
Wave bands - without
Power type and voltage Alternating Current supply (AC) / 110,125,160,220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 15 W
from Radiomuseum.org Model: MV15
Material Metal case
Shape Table model, with any shape - general.
Dimensions (WHD) 225 x 150 x 125 mm / 8.9 x 5.9 x 4.9 inch

Tech Talk - Dynacord Jazz (1963)

This tube combo-type amplifier was made by Dynacord in late 50s era, called JAZZ (simple but greatest naming!!). Tube's composition are 2 x ECC83, 1 x EZ81, 2 x EL84. 20w simple amplifier but sounds warm and great. Not BOOMY on the mid-range, very clear tone. But S/N is not good. inputs are : 1 x Microphone, 1 x Puckup, 1 x radio. each has the volume pot and 1 x tone-control pot effects overall sounds. Dynacord-JAZZ has the several version. One is the simplest 1 x 10inch speaker (8 ohm). This is the 2 x 10inch speakers (15ohm each). Speaker units was made by Dynacord with Alnico-Magnets. The Amp-head model was also available. This is the red-light gray colored model, but the simple black model also released.

Tech Talk - Dynacord KV-10 (1952)

The pretty small tube combo amplifier with 8-10w power. Inputs : 1 x Microphone, 1 x pickup, 1 x radio. Also the red and blue colored models were released. Manufactured in the late 50s era. Both of the front and back have their Covers for protection when its touring. 1 x 10inch speakers built in. 110v - 240v usable.

Tech Talk - Dynacord Jazz (1964)

This tube combo-type amplifier was made by Dynacord , called JAZZ (simple but greatest naming!!). Tube's composition are 2 x ECC83, 1 x EZ81, 2 x EL84. 20w simple amplifier but sounds warm and great. Not BOOMY on the mid-range, very clear tone. inputs are : 1 x Microphone, 1 x Pickup, 1 x radio. each has the volume pot and 1 x tone-control pot effects overall sounds. Dynacord-JAZZ has the several version. One is the simplest 1 x 10inch speaker (8 ohm). This is the 2 x 10inch speakers (15ohm each). Speaker units was made by Dynacord with Alnico-Magnets. The Amp-head model was also available. This is the red-light gray colored model, but the simple black model also released.

In the 50-60s era, German audio-equipment company used the 3pin DIN plug or 2pin socket for their electrical connections.

Tech Talk - Dynacord KV-6 (1954)

Another cool little amp.

Manufacturer/Brand: Dynacord (Pinternagel)
Year: 1955–1960 Type: Audio Amplifier
Valves / Tubes 3: ECC83 EL84 AZ41
Principle Audio-Amplification
Wave bands - without
Power type and voltage Alternating Current supply (AC) / 110; 220 Volt
Loudspeaker Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil)
Power out 6 W
from Radiomuseum.org Model: KV6
Material Leather / canvas / plastic - over other material
Shape Tablemodel, Mantel/Midget/Compact but not a Portable (See power data. Sometimes with handle but for mains only).
Dimensions (WHD) 230 x 120 x 160 mm / 9.1 x 4.7 x 6.3 inch

Tech Talk - Dynacord DA-15 (1952)

More (but just a little bit) powerful, large and luxury amplifer, called DV15v. 15w power. Also the red colord version was released. Having the 3 input (1 x microphone, 2 x pickup) and there's the TREMORO (vibration) pots (depth and speed controled separately). 110v - 240v usable.

Tech Talk - Dynacord "Amigo" (1967)

Manufacturer/Brand: Dynacord
Year: 1964 ? Type: Audio Amplifier
Valves / Tubes 4: ECC83 EBC91 6L6 EZ80
Principle Audio-Amplification
Wave bands - without
Power type and voltage Alternating Current supply (AC) / 110; 130; 220; 240 Volt
Loudspeaker 2 Loudspeakers
Power out 8 W
Model: Amigo
Material Leather / canvas / plastic - over other material
Dimensions (WHD) 500 x 400 x 235 mm / 19.7 x 15.7 x 9.3 inch