Saturday, June 2, 2012

Tech Talk - Paul Daniel McGill MKS Custom


This wonderous beast was custom built by Paul McGill using scrumptious Cocobolo Rosewood and some 40 year old German Spruce that Paul found years ago. The Headplate, heelcap, backstrip and rosette feature rare burled Box Elder with superb figure and colors. The headstock and top are bordered with Abalone. The voice is all McGill, big, bold projection thanks to Paul's unique bracing that incorporates internal struts add strength and allow for lighter top bracing. The trebles just leap out of this guitar and the bass is resounding. This is a real room filler and it's rich and beauitiful across the spectrum. This is a very special custom McGill Guitar.

Measurements
Body Size: Medium
Scale: 25.25 in. (641 mm)
Nut Width: 1 3/4 in. (44.45 mm)
String Spacing: 2 1/4 in. (57.15 mm)
Body Length: 19 3/8 in.
Upper Bout: 11 3/8 in.
Lower Bout: 15 1/8 in.
Serial #: 7
Body Depth @Neck Heel: 3 5/8 in.
Body Depth @Tail Block: 4 in.
Frets to body: 12
Woods & Trim
Back/Sides: Cocobolo Rosewood
Top Wood: Bearclaw German Spruce, 40 years old
Fingerboard: Ebony
Neck Wood: Mahogany
Bridge: Ebony with Dual Saddles
Rosette: Burled Box Elder and Abalone
Binding: Koa
Fingerboard Bindings: Ebony
Headplate: Burled Box Elder
Headstock Bindings: Koa
Headstock Inlay: Builder Logo
Top Trim: Abalone
Back Strip: Burled Box Elder
Fret Markers: None
Tuners: Nickel open-backed Gotohs
Tuner Finish: Nickel


If you like what I’m doing, Like ---Bman’s Blues Report--- Facebook Page! I’m looking for great talent and trying to grow the audience for your favorites band! - ”LIKE”

No comments:

Post a Comment